NEC Univerge SV8100 Features And Specifications Manual page 605

UNIVERGE SV8100
Program
Program Name
Number
20-02-09 System Options for Multiline
Telephones – Disconnect
Supervision
20-02-12 System Options for Multiline
Telephones – Forced Intercom
Ring (ICM Call Type)
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-11-12 Class of Service Options (Hold/
Transfer Service) – Call
Forwarding Off-Premise
(External Call Forwarding)
20-13-05 Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
20-13-10 Class of Service Options
(Supplementary Service) –
Barge-In Monitor
20-13-15 Class of Service Options
(Supplementary Service) –
Barge-In, Initiate
20-13-16 Class of Service Options
(Supplementary Service) –
Barge-In, Receive
DTPlusWare
Description/Comments
Set to Enable (1) for DTPlusWare.
Enable/Disable disconnect
supervision for the system trunks.
Set to Signal (1) for DTPlusWare.
Enable/Disable Forced Intercom
Ringing. If enabled, incoming
Intercom calls normally ring. If
disabled, Intercom calls
voice-announce.
Set to Off (0) for DTPlusWare.
Turn Off or On the extension ability
to receive a second call from a
DID, DISA, DIL, or tie line caller.
Set to Off (0) for DTPlusWare.
Turn Off or On an extension ability
to have calls queued if a call rings
the extension when it is busy.
Set to On (1) for DTPlusWare.
Turn Off or On setting Call
Forwarding Off-Premise at the
extension.
Set to Off (0) for DTPlusWare.
Turn Off or On an extension user
ability to receive off-hook signals.
Set to Off (0) for DTPlusWare.
Allow a busy extension to
Manually (0) or Automatically (1)
receive off-hook signals.
Set to Off (0) for DTPlusWare.
Enable Barge-In Speech or
Monitor Mode at the initiating
extension (i.e., Barge-In initiator).
Set to On (1) for DTPlusWare.
Turn Off or On an extension user
ability to barge-in on other's calls.
Set to On (1) for DTPlusWare.
Turn Off or On Barge-In at the
receiving extension (i.e., Barge-In
receive).
Assigned Data
1
0 = Disable
1 = Enable
(default = 1)
0 = Disable (Voice)
1 = Enable (Signal)
(default = 0)

0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 0 for
COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Speech
1 = Monitor
(default: 0 for COS
1~15)
0 = Off
1 = On

(default: 0 for COS
1~15)
0 = Off
1 = On

(default: 0 for COS
1~15)
Issue 11.0
Level
2 3


2 - 573