NEC Univerge SV8100 Features And Specifications Manual page 914

Issue 11.0
ISDN – BRI/PRI Features
DID Line Service

When configured for DID Line Service, the trunks emulate Loop Start or Ground Start trunks for
outgoing calls and DID trunks for incoming calls.
Calling Line Identification Presentation (CLIP)

Program 10-03-05: ETU Configuration – CLIP Information Announcement, allows the Calling Party
Number IE in the Setup Message for a call when placed out an ISDN Trunk.
Calling Party Number (CPN) Presentation from Station

Calling Party Number (CPN) Presentation from Station allows each unique station or virtual
extension 10-digit number (representing the DID number of the originating station) to be sent out
over the ISDN Network, if it is programmed. If no Extension Calling Number is assigned, the
system sends the calling number for the ISDN trunk. If both the extension and trunk information are
programmed, the extension information is sent as it takes priority.
Calling Party Name

If programmed, Calling Party Name allows the station name to be sent out over the ISDN network.
A system wide name can be programmed to be sent over the network or the name can be defined
on a per station basis. If both are programmed, the system wide name takes priority over the
station name.
SMDR Includes Dialed Number

The SMDR report can optionally print the trunk name (entered in system programming) or the
number the incoming caller dialed (i.e., the dialed ISDN digits). This allows you to analyze the
SMDR report based on the number your callers dial. (This option also applies to a DID trunk.)
Display Shows Why Caller ID is Not Available

With Caller ID enabled, the system provides information for ISDN calls that do not contain the
Caller ID information. If the Caller ID information is restricted, the telephone display shows
PRIVATE. If the system cannot provide Caller ID information because the Telco information is not
available, the display shows OUT OF AREA.
Conditions
Primary Rate Interface (PRI):

The system is compatible with ISDN Primary Rate Interface (PRI) services. PRI services
currently supported include:
Basic PRI Call Control (BCC)

Display of incoming caller's name and number when allowed by Telco

Routing in the system based on the number the caller dialed

ISDN maintenance functions (such as In Service/Out of Service Messaging)

2 - 882
UNIVERGE SV8100
ISDN Compatibility