NEC Univerge SV8100 Features And Specifications Manual page 1458

Issue 11.0
Program
Program Name
Number
14-01-06 Basic Trunk Data Setup – SMDR
Printout
14-04-01 Behind PBX Setup
15-01-03 Basic Extension Data Setup –
SMDR Printout
15-01-14 Basic Extension Data Setup –
SMDR Output of Maid Intercom
Calls
15-01-15 Basic Extension Data Setup –
SMDR Output of Answered
Intercom Calls
15-02-19 Multiline Telephone Basic Data
Setup – CTA Data
Communication Mode
15-02-20 Multiline Telephone Basic Data
Setup – Baud Rate for CTA Port
16-02-01 Department Group Assignment
for Extensions – Extension
Group Setting
20-07-18 Class of Service Options
(Administrator Level) – SMDR
Printout Accumulated Extension
Data
2 - 1426
Description/Comments
Have the system print or Not print
the trunk you are programming in
the SMDR printout. Refer to
Programs 35-01 and 35-02 for
SMDR printout options.
For ANI/DNIS, the following
additional setting is
recommended: Behind PBX = 0
(Stand Alone).
For each extension, enter 1 if
extension calls should print on the
SMDR report. Enter 0 if extension
calls should not print on the SMDR
report.
When set to 0 (Disable) it will not
record sent internal calls.
When set to 0 (Disable) it will not
record received internal calls.
Select 0 if the dip switch settings
on the CTA Adapter are set to PC
connection (1=on, 2~8=off) or
select 1 if the DIP switches are set
to printer connection (1~2=on,
3~8=off).
Select the baud rate used by the
CTA adapter.
Use to set up the extension group.
Determine if Accumulated
Extension Data is included in the
SMDR report for each COS.
UNIVERGE SV8100
Assigned Data
0 = No Print Out
1 = Prints Out
(default = 0)
0 = Stand Alone
(Trunk)
1 = Behind PBX (PBX)
2 = Not Used
3 = CTX assume 9
(default = 0)
0 = Do not print on
SMDR report
1 = Include on SMDR
report
(default = 1)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 0)
0 = CTI Mode
1 = Non Procedural
Mode (Non-SCS)
(default = 0)
0 = 4800
1 = 9600
2 = 19200
(default = 2)
1-64
(default = 1)
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
Station Message Detail Recording
Level
1 2 3








