Table 2-99 Adapter Compatibility; Table 2-100 Ipla Dsp Usage - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Table 2-99 Adapter Compatibility

— = Option Not Available

= Optional Available

Encryption must be turned on in the DT700 as well as the SV8100 for encryption to take

Encryption is supported between the DT700 terminal and the IPLA/IPLB (VoIPDB).

Encryption can be enabled on a per phone basis.

CCISoIP and SIP trunking are not supported.

Program 10-26-02 RTP forwarding is not supported with encryption.

Multicast (paging, room monitor, etc.) is not encrypted.

If Program 90-45-01 is used to change the temporary password, all terminals using

encryption will be logged off. Terminals will then need the 1-time password to be reentered.

Encryption is not supported on DT700 series phones that are connected via NAPT.

Encryption is not supported on DT700 series phones that are registered to a secondary

NetLink system.

With Version 4000 or higher main software, DT700 series phones that are registered to a

primary NetLink can fail over to a secondary system regardless of encryption settings.

Table 2-100 IPLA DSP Usage on page 2-1508

lists the Digital Signal Processors (DSP) usage with the different CODECs

SV8100/SV8300 Terminals

shows the compatibility between the adapters used in the

Table 2-99 Adapter Compatibility

Table 2-101 IPLB DSP Usage on page

Table of Contents