Table 2-74 Intercom Or Trunk Ring Setting - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Program
Program Name
Number
15-08-01 Incoming Virtual Extension Ring
Tone Setup
15-10-01 Incoming Virtual Extension Ring
Tone Order Setup
22-03-01 Trunk Ring Tone Range

Table 2-74 Intercom or Trunk Ring Setting

1 = High
2 = Mid Range
3 = Low
4 = Ring Tone 1
Operation
To change your extension incoming ring tones:
1. Press Speaker.
Selectable Ring Tones
Description/Comments
When an extension or a virtual
extension is assigned to the
function key on the key telephone,
select the ring tone when receiving
a call on that key.
For ACD CAR keys, only tone
pattern 1 can be used. The
remaining patterns are not
checked with this feature.
When two or more virtual
extensions are set on a function
key on the telephone, and the tone
pattern by which the sound of
each extension differs, the priority
of ring sound is set up.
Select the ring tone range for the
trunk. The trunk uses a ring tone in
the range selected when it rings
an extension. Eight ring tones are
available.
5 = Ring Tone 2
6 = Ring Tone 3
7 = Ring Tone 4
8 = Ring Tone 5
Assigned Data
1
ICM Tone Pattern,
0 = Pattern 1
1 = Pattern 2
2 = Pattern 3
3 = Pattern 4
4 = Incoming Ring
Tone Extension
5 = Pattern 5
6 = Pattern 6
7 = Pattern 7
8 = Pattern 8
(default = 0)
Default Priority order
1 = 0 (Tone Pattern 1)
2 = 1 (Tone Pattern 2)
3 = 2 (Tone Pattern 3)
4 = 3 (Tone Pattern 4)
0~12
(Ring Tone Pattern
1~4)
(Melody 1~ Melody 5)
(Ring Tone Pattern
5~8)
(default = 0)
Issue 11.0
Level
2 3



2 - 1315