NEC Univerge SV8100 Features And Specifications Manual page 1183

UNIVERGE SV8100
Related Features
Central Office Calls, Placing
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Direct Station Selection (DSS) Console
Door Box
Night Service
Paging, Internal
Programmable Function Keys
Transfer
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
10-05-01 General Purpose Relay Setup –
Slot No. Physical Port of DLCA
Sensor Circuit No.
Paging, External
Description/Comments
Define which relay circuits (5~8)
on the PGD(2)-U10 ADP are used
for General Purpose Relays.
Assigned Data
1
Slot No: 0~24
DCLA Port: 0~16
Relay No: 0, 5~8
 After each entry, 
press Transfer to
advance to the
next entry.
(default = 0 - 0 - 0)
Issue 11.0
Level
2 3
2 - 1151