NEC Univerge SV8100 Features And Specifications Manual page 825

UNIVERGE SV8100
Feature Name
Paging, Internal
Park
PBX Compatibility
PC Programming
Personal Park
Power Failure Transfer
Prime Line Selection
Private Line
Programmable Function Keys
Programming from a Multiline Terminal
Pulse to Tone Conversion
Quick Transfer to Voice Mail
Repeat Redial
Reverse Voice Over
Ring down Extension, Internal/External
Ring Groups
Room Monitor
Save Number Dialed
Secondary Incoming Extension
Secretary Call (Buzzer)
Secretary Call Pickup
Selectable Display Messaging
Selectable Ring Tones
Serial Call
Single Line Telephones, Analog 500/2500 sets
SLT Adapter
SMB8000 Interactive Voice Response
SMB8000 Conference Bridge
IP Multiline Station (SIP) – ML440 Cordless
ML440
Yes A ML-440 can only initiate an Internal, External or
All Call Page. It cannot receive either Internal or All
Call pages or display page information.
Yes
Yes
Yes
Yes
No
Yes Prime Line Selection can be assigned for a ML-440
however, when this is done the phone cannot
access ICM dial tone. In addition the ML-440 does
not follow program 20-08-21 settings.
Yes
Yes
No
No
Yes
No
No
Yes A ML-440 can be a ring down destination but cannot
originate a ring down call.
Yes
No A ML-440 can be monitored but cannot monitor
other extensions.
Yes
Yes
Yes
Yes Voice announcement is not supported on ML-440
Handset
Yes
No Selectable Ring Tones is a function of the ML-440
and not the phone system.
Yes
N/A
N/A
Yes
Yes
Issue 11.0
Comment
2 - 793