Maintenance - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Enhancements

With Version 7000 or higher software, the Side Tone Auto Setup feature has been

The UNIVERGE SV8100 system has several utilities to assist in troubleshooting and

diagnosing problems both during and after installation.

PCPro can remotely access the UNIVERGE SV8100 for maintenance and diagnostics.

Within PCPro, the debug terminal can be accessed to monitor the systems activity and

logging. PCPro also has built-in reports that can display alarm data. If need be, an option in

PCPro allows the technician to reset or initialize the system remotely. If the technician

determines the problem is isolated to a specific slot, PCPro can reset only the slot in

The SV8100 Maintenance manual contains a number of flow charts to help technicians

diagnose and resolve problems that may arise during and after the installation of the

UNIVERGE SV8100 system.

For detailed information on the Maintenance feature, refer to the UNIVERGE SV8100

System Maintenance Manual.

Side Tone Auto Setup

Per each analog trunk (or all analog trunks) the most suitable Codec Filter setting for

Program 81-07 and Program 81-17 can be automatically adjusted using Programs 90-68-01

and 90-68-02.

During the trunk measurement process, the following LCD indications are provided:

During measurement: Measurement (x/4)

x = number of measurements

Measure complete: Complete

Error condition: Error

Trunk busy: Busy

Maintenance

Table of Contents