NEC Univerge SV8100 Features And Specifications Manual page 587

UNIVERGE SV8100
Program
Program Name
Number
20-08-15 Class of Service Options
(Outgoing Call Service) – Block
Outgoing Caller ID
20-08-16 Class of Service Options
(Outgoing Call Service) – Display
E911 Dialed Extension Name and
Number
20-08-17 Class of Service Options
(Outgoing Call Service) – ARS
Override of Trunk Access Map
20-08-22 Class of Service Options
(Outgoing Call Service) – Voice
Over to busy Virtual Extension
20-09-01 Class of Service Options
(Incoming Call Service) –
Second Call for DID/DISA/DIL/
E&M Override
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
20-09-03 Class of Service Options
(Incoming Call Service) – Sub
Address Identification
term
D Cordless Lite II Terminal
Description/Comments
Turn Off or On a user Class of
Service from automatically
blocking outgoing Caller ID
information when a call is placed.
If block is enabled, the system
automatically inserts the Caller ID
block code 67 (defined in
Program 14-01-21) before the
user dialed digits (this requires
Program 14-02-10 to be enabled).
If block is disabled, the system
outdials the call just as it was
dialed by the user.
Turn Off or On an extension ability
to display the name and number of
the extension that dialed 911.
Turn Off or On an extension user
ability to override the trunk access
map programming for outgoing
calls.
Enable/Disable an extension user
ability to voice over to a busy
virtual extension.
Turn Off or On an extension ability
to receive a second call from a
DID, DISA, DIL, or tie line caller.
 With this option set to 1, the
destination extension must
be busy for a second DNIS
caller to ring through. If the
destination extension does
not have a trunk or CAP key
available for the second call
and a previous call is ringing
the extension but has not yet
been answered, the second
caller hears busy regardless
of this program setting.
Turn Off or On the Caller ID
display at an extension.
Define whether or not an
extension displays the Caller
Sub-Address.
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 11.0
Level
2 3







2 - 555