NEC Univerge SV8100 Features And Specifications Manual page 574

Issue 11.0
Program
Program Name
Number
20-13-50 Class of Service Options
(Supplementary Service) – AIC
Agent display which call is from
20-13-51 Class of Service Options
(Supplementary Service) –
Number and Name appear in the
directory
Operation
term
To program the D
1. Press and hold down
2. Press R/VOL repeatedly to scroll through the line key (LK) and feature options for function key F1.
3. Press MUTE to select the displayed line key or feature.
4. When a Line Key is assigned, press MUTE once to enter the Off-Hook Ringing ON or OFF Mode.
Press R/VOL to toggle between /TALK for ON or /NO TALK for OFF.
5. Press MUTE to advance to the next function key (F2~F4).
6. After programming F4, press MUTE to advance to Global Off-Hook Ringing Assignment.
7. Press R/VOL to turn Global Off-Hook Ringing ON/OFF (LCD indicates ON or OFF).
8. Press TALK to exit.
Function keys F1~F4 can be programmed as Line Keys 1~16, Redial (LNR/SPD), Answer (ANS), Feature

(FNC), or Recall. When assigned, these keys operate the same as on an NEC multiline terminal.
When initially installed, function keys F1~F4 default to Line Keys 1~4 respectively and Off-Hook Ringing

defaults to ON.
Global Off-Hook Ringing must be ON (default) for any Function key to work with Off-Hook Ringing.

To place an internal call:
1. Press TALK. icon is displayed.
2. Dial the Station Number.
- OR -
Press (F1~F4), programmed for Direct Station Selection (DSS).
2 - 542
Determine if the station logged in
via AIC codes shows which queue
the call is coming from.
Determine if an extension name
and number are Listed (1) or
Unlisted (0) in the directory.
Cordless II:
and , then press TALK. The F1 LED flashes red.
#

Description/Comments
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
term
D Cordless II Terminal
Level
2 3

