NEC Univerge SV8100 Features And Specifications Manual page 1288

Issue 11.0
Program
Program Name
Number
22-08-01 DIL/IRG No Answer Destination
22-12-01 DID Intercept Ring Group
25-03-01 VRS/DISA Transfer Ring Group
With Incorrect Dialing
Use the charts below to program the following example:
2 - 1256
Description/Comments
For DIL Delayed Ringing, assign
the DIL No Answer Ring Group.
An unanswered DIL rings this
group after the DIL No Answer
Time (Program 22-01-04) expires.
DIL Delayed Ringing can also
reroute outside calls ringing a Ring
Group In-Skin/External Voice Mail,
or Centralized Voice Mail.
For each DID Translation Table,
assign the destination for DID
Intercept. The destination can be a
Ring Group, In-Skin/External
Voice Mail, or Centralized Voice
Mail. For each table, make a
separate entry for each Night
Service mode.
Set the transfer destination for
each DISA and Automated
Attendant (OPA) trunk. The
destination can be a Ring Group
or Voice Mail. Make a separate
entry for each Night Service mode.
For incoming calls, Ring

Group programming
(Program 22-04/Program
22-05) overrides Access Map
programming (Program
14-07/Program 15-06).
1, 2
For this extension . . .
301 Trunk 1 Rings
302 Trunk 1 Flashes
303 Trunk 1 Flashes
1
Trunks ring the same in the day as at night.
2
MLT has trunk appearances not CAP keys.
Assigned Data
0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
0 (No Setting)
1~100 (Incoming Ring
Group)
102 (In-Skin/External
Voice Mail or VM8000
InMail)
(default = 1)
Ring Groups:
1~100
Trunk Ports:
001~200
Day/Night Mode:
1~8
0 (Disconnect)
1~100 (Incoming Ring
Group)
102 (In-Skin/External
Voice Mail or VM8000
InMail)
104 (Speed Dial table
Program 25-15-01)
Version 3000 software
or higher is required.
(default = 0)
Trunk 2 Flashes Trunk 3 Flashes
Trunk 2 Rings Trunk 3 Flashes
Trunk 2 Flashes Trunk 3 Rings
UNIVERGE SV8100
Level
1 2 3



Ring Groups