NEC Univerge SV8100 Features And Specifications Manual page 925

UNIVERGE SV8100
Program
Program Name
Number
10-03-20 ETU Setup (PRTA PKG Setup) –
Network Exchange Selection
10-03-21 ETU Setup (PRTA PKG Setup) –
PRI Number of Ports
10-39-01 Fractional Setup
14-05-01 Trunk Group – Trunk Group
Number
21-01-03 System Options for Outgoing
Calls – Trunk Interdigit Time
(External)
21-12-01 ISDN Calling Party Number
Setup for Trunks – Calling Party
Number Data
ISDN Compatibility
Description/Comments
Select the ISDN protocol for the
ISDN circuit.
Select the number of ports for the
PRI.
Enable/Disable the T1/PRI
fractional function.
Assign trunks to trunk groups then
go to Program 14-06-01 below to
set up Trunk Group Routing.
The time the system waits for the
timer to expire before placing the
call in a talk state.
Assign Calling Party Numbers for
each trunk (maximum 16 digits per
entry).
 After the above programming
is complete a reset of the
CD-PRTA is required.
Assigned Data
1
0 = Standard (Same as
NI-2)
1 = reserved
2 = reserved
3 = DMS (A211)

4 = 5ESS
5 = DMS (A233)
6 = 4ESS
7 = NI-2
(default = 0)
0 = Auto
1 = 4 Ports
2 = 8 Ports

3 = 12 Ports
4 = 16 Ports
5 = 20 Ports
(default = 0)
0 = Disable

1 = Enable
(default = 0)
Trunk Group Number:
0~100 Priority Number:

1~200 (default = Trunk
Group 1, with priority in
ascending order.)
0~64800 (seconds)
(default = 5)
(maximum 16 digits)
#
1-0, ,
Default:
(All trunks = No setting)
Issue 11.0
Level
2 3


2 - 893