NEC Univerge SV8100 Features And Specifications Manual page 784

Issue 11.0
Program
Program Name
Number
20-08-19 Class of Service Options
(Outgoing Call Service) – Hotline
for SPK
20-11-06 Class of Service Options (Hold/
Transfer Service) – Unscreened
Transfer (Ring Inward Transfer)
20-11-11 Class of Service Options (Hold/
Transfer Service) – Automatic
On-Hook Transfer
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
21-01-09 System Options for Outgoing
Calls – Ringdown Extension
Timer (Hotline Start)
21-11-01 Extension Ringdown (Hotline)
Assignment
22-01-01 System Options for Incoming
Calls – Incoming Call Priority
30-05-02 DSS Console Lamp Table – Busy
Extension
30-05-03 DSS Console Lamp Table – DND
Extension
30-05-04 DSS Console Lamp Table – ACD
Agent Busy
30-05-05 DSS Console Lamp Table – Out
of Schedule (ACD DSS)
2 - 752
Description/Comments
Turn Off or On an extension user
ability to press Speaker to activate
hotline or ringdown.
Turn Off or On an extension user
ability to use Unscreened
Transfer.
Turn Off or On an extension user
ability to use Automatic On-Hook
Transfer.
Program 20-02-03 and Program
20-13-06 set the conditions under
which a Hotline, Reverse Voice
Over or DSS Console key
indicates that an extension is busy.
With condition 1 in the following
chart, the BLF LED is on only
when both extension line
appearances are busy. In
conditions 2~4, the BLF LED is on
when one line appearance is busy.
A Ringdown extension
automatically calls its programmed
destination after this time.
Define the Hotline destination
number for each extension
number.
Determine if Intercom calls or
trunk calls have answer priority
when both are ringing
simultaneously.
Define the LED patterns for busy
extensions on the DSS consoles.
Define the LED patterns for DND
extensions on the DSS consoles.
Define the LED patterns for busy
ACD agents function on the DSS
consoles.
Define the LED patterns for out of
schedule (ACD/DSS) on the DSS
consoles.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Refer to Table 2-38
Extension Busy Setup
on page 2-754
0~64800
(default = 5)
(maximum 24 digits)
#
0, , , Pause, Hook

Flash, @ (Code to wait
for answer supervision)
(default not assigned)
0 = Intercom call
priority
1 = Trunk call priority
(default = 1)
0~7
[default = 7 (On)]
0~7
[default = 3 (RW)]
0~7
[default = 7 (On)]
0~7
[default = 0 (Off)]
Level
2 3










Hotline