Security - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Enhancements
Security feature added with Version 7000 or higher software and requires Version 7000
Enhancement License (0036).
Description
This system supports the following built-in simple security features:
Warning Message (Watch Mode)

Automatically and periodically send the Watching (VRS) Message from built-In Speaker on
Multiline Terminal or external paging adapter during nightmode.
Enable to accommodate with 3rd Party PIR (Passive Infrared Sensor) or Emergency Button to
provide security feature such as Auto-Emergency Call with Warning (VRS) Message sending.
Remote Inspection

Automatically ring the terminal with pre-programmed schedule in order to check whether users
answer or not. If not answered, Emergency Call is placed to predefined destination automatically.
Conditions
Warning Message (Watch Mode)
Watch mode can provide Watching message in a preprogrammed interval via internal

paging group terminals during defined schedule such as night time.
When connected to the system the security sensor will receive sensor detections and send

a prepared warning message or emergency call to a pre-programmed destination.
When connecting security sensor, set Program 20-46-01 Sensor mode to 1 (On), the

security sensor can be connected to the detector circuit on the 2PGDAD. A maximum of
eight sensors can be connected.
Applied voltage when sensor is Off: 5V

Loop current when sensor is On: 14mA

When the system receives a detection signal from a contact on the 2PGDAD detector

circuit. The input circuit contact setting in Program 20-46-12 must match the circuit setting
in Program 10-41-01.
Watch mode can be started and stopped automatically using settings in Program 20-47-01.


Security

Issue 11.0
Security
2 - 1287