NEC Univerge SV8100 Features And Specifications Manual page 1020

Issue 11.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-10-06 Class of Service Options
(Answer Service) – Meet-Me
Conference and Paging
31-01-04 System Options for Internal/
External Paging – Privacy
Release Time
 For additional programming for Paging, refer to the
2 - 988
Description/Comments
Assign function keys for
Conference (code 07).
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension user
ability to use Meet-Me Conference
and Paging.
Set the Privacy Release Time.
After the user initiates Meet Me
Conference, the system waits this
interval for the Paged party to join
the conversation.
Paging, External
UNIVERGE SV8100
Assigned Data
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0~64800 (seconds)
(default = 90)
and Paging, Internal features.
Meet Me Conference
Level
1 2 3



