NEC Univerge SV8100 Features And Specifications Manual page 1159

UNIVERGE SV8100
Program
Program Name
Number
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-13-05 Class of Service Options
(Supplementary Service) –
Intercom Off-Hook Signaling
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
20-13-34 Class of Service Options
(Supplementary Service) – Block
Manual Off-Hook Signaling
20-18-06 Service Tone Timers – Interval of
Call Waiting Tone
80-01-01 Service Tone Setup – Repeat
(39) Count
80-01-02 Service Tone Setup – Basic Tone
(39) Number
Off-Hook Signaling
Description/Comments
Turn Off or On an extension ability
to have calls queued if a call rings
the extension when it is busy.
Must be set to 1 to enable

automatic off-hook Signaling.
Turn Off or On an extension user
ability to receive Off-Hook Signals.
Allow a busy extension to
Automatically (1) or Manually (0)
receive off-hook Signals.
Turn Off or On an extension user
ability to block off-hook signals
manually sent from a co-worker.
Set the time between off-hook
Signaling alerts.
Customize the system basic tones
and system service tones. The
system must be reset for the
changes to take affect.
The following features require that
the system tones listed below be
changed to match the table. After
changing these settings the
chassis must be reset for the
changes to take effect.
Call Screening

Call Holding

Busy Greeting

Await Answer Transfer

Assigned Data
1
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 10)
Refer to Table 2-33
Service Tone Setup
Defaults, Program
80-01-01 on page
2-701.
Refer to Table 2-34
Service Tone Setup,
Program 80-01-02 on
page 2-705.
Issue 11.0
Level
2 3




2 - 1127