NEC Univerge SV8100 Features And Specifications Manual page 1135

UNIVERGE SV8100
When Using a PGD(2)-U10 ADP:
Program
Program Name
Number
10-03-01 ETU Setup (DLCA PKG Setup) –
Terminal Type (B1)
10-24-01 Daylight Savings Setup –
Daylight Savings Mode
11-06-01 ACI Extension Numbering
11-08-01 ACI Group Pilot Number – Dial
22-11-09 DID Translation Number
Conversion – Music On Hold
Source
33-01-01 ACI Port Type Setup
Music on Hold
Description/Comments
If a PGD(2)-U10 ADP is used for
the external music source, the
module is automatically assigned
type 9 if the jumper straps in the
module were set prior to
connecting it to the system. If
another type was assigned,
disconnect the PGD(2)-U10 ADP
from the system, delete the type
setting, and, with the jumper
straps positioned correctly in the
PGD(2)-U10 ADP, reconnect the
module to the system. Refer to
the UNIVERGE SV8100 System
Hardware Manual for the jumper
strap settings.
Enable/Disable the system ability
to adjust the time for daylight
savings/standard time.
Each ACI port must be assigned
an extension number. Assign the
extension numbers to ACI
software ports. Select a number
outside of the normal extension
number range.
Assign pilot numbers to ACI
groups. When a user dials the pilot
number, they reach an available
ACI software port in the group.
For each DID Translation Table
entry (1~2000), specify the source
of music to be used for DID trunks.
Set each ACI software port for
Input or Input/Output. Use input
ports for Music on Hold sources.
Use output ports for External
Paging/Ringer Control.
Assigned Data
1
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter
3 = Bluetooth Cordless
Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)

9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
(default = 0)
0 = Disable

1 = Enable
(default = 1)
ACI Ports: 1~96
(default not assigned)

Up to eight digits
ACI Groups: 1~16

(default not assigned)
0 = IC/MOH Port
1 = BGM Port
2 = ACI Port
(default = 0)
ACI Ports: 1~96
ACI Types:
0 = None

1 = MOH/BGM (Input)
2 = External Audio
Port (Input/Output
(default = 2)
Issue 11.0
Level
2 3

2 - 1103