NEC Univerge SV8100 Features And Specifications Manual page 1426

Issue 11.0
Program
Program Name
Number
80-04-07 Call Progress Tone Detector
Setup – ON maximum time
80-04-08 Call Progress Tone Detector
Setup – OFF minimum time
80-04-09 Call Progress Tone Detector
Setup – OFF maximum time
Operation
To store an Speed Dialing number (display telephones only):
1. Press Speaker.
2. Dial 753 (for system) or 754 (for group).
3. Dial system or group storage code.
Initially, there are 1000 System Speed Dialing codes. There are Group Speed Dialing codes only if you define

them in programming.
4. Dial telephone number you want to store (up to 24 digits).
Valid entries are 0~9, # and

Enter @ for await answer before sending following digits on ISDN.

2 - 1394
Description/Comments
Define the on maximum time for
the Call Progress Tone Detector.
Define the off minimum time for
the Call Progress Tone Detector.
Define the off maximum time for
the Call Progress Tone Detector.
. To enter a pause, press Transfer. To store a Flash, press Recall.

UNIVERGE SV8100
Assigned Data
0~255 (30+30-
7680ms)
default:
Type 1 (DT) – 0
Type 2 (BT) – 20
(450ms) [ET]
Type 3 (RBT) – 40
1230ms)
Type 4, Type 5 – 0
1~255 (30+30-
7680ms)
default:
Type 1 (DT) – 1 (60ms)
Type 2 (BT) – 12
(300ms)
Type 3 (RBT) – 83
(2520ms)
Type 4, Type 5 – 0
0~255 (30+30-
7680ms)
default:
Type 1 (DT) – 1 (60ms)
Type 2 (BT) – 20
(450ms)
Type 3 (RBT) – 115
(3480ms)
Type 4, Type 5 – 0
Speed Dial – System/Group/Station
Level
1 2 3


