NEC Univerge SV8100 Features And Specifications Manual page 1013

UNIVERGE SV8100
Ring Groups
Tie Lines
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
14-05-01 Trunk Group – Trunk Group
Number
Loop Keys
Description/Comments
For Auto-Answer of Non-Ringing
Lines, assign trunks to trunk
groups. This is part of Trunk
Group Routing programming.
Assigned Data
1
Trunk Group Number:
0~100
Priority Number: 1~200
(default = Trunk Group
1, with priority in
ascending order)
Issue 11.0
Level
2 3

2 - 981