NEC Univerge SV8100 Features And Specifications Manual page 542

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 11.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-11-08
Service Code Setup (for Setup/
Entry Operation) – Do Not
Disturb
11-12-01
Service Code Setup (for Service
Access) – Bypass Call
11-16-06
Single Digit Service Code Setup
– DND/Call Forward Override
Bypass
15-07-01
Programmable Function Keys
20-06-01
Class of Service for Extensions
20-09-13
Class of Service Options
(Incoming Call Service) – DND
Active While Ringing
20-13-04
Class of Service Options
(Supplementary Service) – Call
Forward/DND Override (Bypass
Call)
2 - 510
Description/Comments
Assign Service Code for DND.
Assign Service Code for DND.
If a single digit service code is to
be used, assign an available code
number.
Assign functions to multiline
terminal line keys (DND = 3).
Assign a Class of Service (1~15)
to an extension.
Assign when the DND will be
enforced (set at same time a call is
ringing or for next call).
Turn Off or On an extension user
ability to use Call Forwarding/DND
Override.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 747)
MLT, SLT
(default = 707)
(default not assigned)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
00 ~
99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Immediate
1 = Next
(default = 0 for all
COS)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Do Not Disturb
Level
2
3

Advertisement

Table of Contents
loading

Table of Contents