Timer Count Register (Tcr) - Freescale Semiconductor DSP56311 User Manual

Triple Timer Module Programming Model

9.4.7 Timer Count Register (TCR)

The TCR is a 24-bit read-only register. In timer and watchdog modes, the contents of the counter
can be read at any time from the TCR register. In measurement modes, the TCR is loaded with
the current value of the counter on the appropriate edge of the input signal, and its value can be
read to determine the width, period, or delay of the leading edge of the input signal. When the
timer is in measurement mode, the signal is used for the input signal.
TIO
DSP56311 User's Manual, Rev. 2
Freescale Semiconductor 9-29