Customizing The Control Panel; Changing The Screen Default - Fuji Xerox ApeosPort-V 4020 Administrator's Manual

Hide thumbs Also See for ApeosPort-V 4020:

Table of Contents

Customizing the Control Panel

You can change the services displayed on the touch screen or the features assigned to the

buttons to make best use of the machine.

This section describes how to change the screen default, the services displayed after Auto

Clear, the services displayed on the Services Home screen, and the services assigned to the

custom buttons, and how to adjust the screen brightness.

For information on how to change the other settings of the control panel, refer to "Screen/Button Settings" (P.115).

You can change the screen displayed when the machine is turned on or the Power Saver

mode is deactivated.

The Services Home screen is displayed by factory default.

Press the <Log In/Out> button.

Enter the system administrator's user ID with

the numeric keypad or the keyboard displayed

on the screen, and select [Enter].

When a passcode is required, select [Next] and

enter the system administrator's passcode, and

select [Enter].

• The default user ID is "11111".

• The default passcode is "x-admin".

Select [Tools] on the Services Home screen.

• When the Services Home screen is not

Select [System Settings] > [Common Service

Settings] > [Screen/Button Settings].

displayed on the touch screen, press the

<Services Home> button.

<Log In/Out> button

Docuprint m465 ap