Phaser 6000/6010 Printer Plug/Jack Designations - Xerox Phaser 6000 Service Manual

Phaser 6000/6010 Printer Plug/Jack Designations

Phaser 6000/6010 and WC 6015 MFP
This chapter contains the plug/jack designators, locator diagrams, and wiring
diagrams. The Plug/Jack Locator diagrams show the P/J locations within the
printer. Use these illustrations to locate connections called out in the
troubleshooting procedures presented in Sections 3, 4, and 5.
1. Locate the P/J connector designator in the first column of the table.
2. With this information, go to the map listed in the Map column.
3. Use the coordinates to locate the connection indicated on the map by its P/J
designation number.
4. The Remarks column provides a brief description of each connection.
For WorkCentre 6015 MFP plug and jack designators, see "WorkCentre 6015 MFP
Printer Plug/Jack Designations" on page 10-19.
Phaser 6000/6010 Plug and Jack Designators
P/J Map Coordinates Remarks
1 2 I-122
1 2 I-123
2 2 J-122
3 2 J-122
4 2 J-123
5 2 J-123
10 3 I-134
12 3 J-134
12 3 J-134
13 3 H-133
14 3 J-134
14 3 J-134
15 3 I-133
16 3 I-133
17 3 H-134
18 3 I-134
19 3 I-134
20 3 H-134
21 3 I-134
22 3 J-134
23 3 I-134
25 3 I-134
26 3 I-134
111 2 G-123
Xerox Internal Use Only
Connects LED Driver Board and LED/MCU CABLE
Connects LED Driver Board and IP Board
Connects LED Driver Board and FFC LPH (M)
Connects LED Driver Board and FFC LPH (Y)
Connects LED Driver Board and FFC LPH (K)
Connects LED Driver Board and FFC LPH (C)
Connects MCU Board and Deve Drive Assy (K Mode
Switching Solenoid)
Connects MCU Board and RKN SNS Harness (6010N
Only)
Connects MCU Board and RKN SNS Harness (6000B
Only)
Connects MCU Board and DCKR Harness
Connects MCU Board and ADC1 Harness (6010N
Only)
Connects MCU Board and ADC Harness (6000B Only)
Not Connected
Connects MCU Board and Main MOT Harness
Connects MCU Board and LVPS
Connects MCU Board and Fuser
Connects MCU Board and Feed Solenoid
Connects MCU Board and Dispense MOT Harness
Connects MCU Board and HVPS Harness
Connects MCU Board and ESS FFC Assy
Connects MCU Board and LED/MCU Cable
Connects MCU Board and Registration Clutch
Connects MCU Board and Fuser
Not Connected
Wiring
10-5