Troubleshooting
Rear Cover Interlock
4-48
1. Enter Service Diagnostics (page 4-11).
2. Use the Up and Down Arrow buttons to select Printer > IOT Diag > Digital
Input > DI-7.
3. Open and close the Rear Door to actuate the switch.
4. Confirm the number shown on the display increases every time the actuator is
operated.
5. Press the Stop button to stop the test.
6. Close the Rear Door.
Xerox Internal Use Only
Phaser 6000/6010 and WC 6015 MFP
s6015-076