Damaged Media - Xerox Phaser 6000 Service Manual

Image Quality

Damaged Media

Initial Actions
5-26
Paper comes out from the printer wrinkled, folded, or worn-out.
• Check the paper transfer path.
• Ensure there is no debris on the transfer path.
• If feeding through the manual feed slot, try feeding from Tray 1.
Troubleshooting Reference Table
Applicable Parts
Feed Roller, PL2.2.4
Left and Right Feed Roller Cam,
PL2.2.2 and PL2.2.7
Registration Roller, PL2.3.1
Registration Pinch Roller, PL2.3.2
Fuser, PL5.1.1
Separator Pad, PL2.2.11
MCU Board, PL7.2.2
Note
The Main Paper Tray is recommended for paper feeding because paper fed
from the Bypass Tray is prone to skew depending on how the sheet is fed.
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the paper condition.
Is the paper dry and approved for
use?
2 Check the paper path for
contamination or foreign objects.
Is there contamination or foreign
objects in the paper path?
3 Does the image print correctly?
Xerox Internal Use Only
Example Print
Yes No
Go to step 3. Replace with
dry, approved
paper, then go
to step 2.
Clean the Go to step 4.
paper path,
and then go to
step 3.
Complete. Go to step 4.
Phaser 6000/6010 and WC 6015 MFP
s6000-205