Registration Sensor - Xerox Phaser 6000 Service Manual

Troubleshooting

Registration Sensor

4-24
1. Enter Service Diagnostics (page 4-11).
2. Open the Rear Door.
3. Run the Registration Sensor test: Engine Diag > Sensor Test > Regi Sensor.
4. Operate the actuator to check sensor function.
5. Confirm the number shown on the display increases every time the actuator is
operated.
6. Press the Cancel button to stop the test.
7. Close the Rear Door.
Actuator
Xerox Internal Use Only
Registration Sensor
Phaser 6000/6010 and WC 6015 MFP
s6000-144