Xerox Phaser 6000 Service Manual page 96

Theory of Operation
Full Color Mode and B/W Mode
2-40
The Full Color mode uses the four colors of Y, M, C, and K. The B/W mode uses K
only.
To deactivate the components for Y, M, and C during B/W operation, the torque
transmission route is changed between the Full Color and B/W modes.
• Operation in Full Color mode
In the Full Color mode, the magnet rollers for YMCK rotate to form a full-color
visible toner image. The magnet rollers are driven by torque from the Main
Drive Assembly.
Magnet Roller (M)
Magnet Roller (C)
Magnet Roller (K)
Flange D4
Actuator K
(Full Color Mode
Position)
Switching Sensor
Xerox Internal Use Only
Magnet Roller (Y)
Developer Drive
Gear C
Switching Solenoid
Drive To Magnet Roller (Y), (M), (C)
Flange D4
Gear D4 In
Gear D4 Out
Drive From Main Drive
Phaser 6000/6010 and WC 6015 MFP
s6000-107