Fuser & Exit - Xerox Phaser 6000 Service Manual

Fuser & Exit
Phaser 6000/6010 and WC 6015 MFP
• Back Up Roller
Helps the toner particles migrate onto the transfer belt by retaining the belt at
a position where it nearly contacts the print media during the second transfer
process. See "Secondary Transfer" on page 2-12.
• Cleaning Blade
Scrapes off the excess toner remaining on the transfer belt.
Front
Xerox Internal Use Only
Heat Roller
Pressure Belt
Thermostat
Temperature Sensor
(Contact Type)
Fuser
Theory of Operation
Heater Lamp
Fuser Exit Sensor
s6000-105
2-37