Xerox Phaser 6000 Service Manual page 105

Phaser 6000/6010 and WC 6015 MFP
• WorkCentre 6015 MFP IP Board
The IP Board is the print controller of the printer. The IP Board connected to
the MCU Board controls the entire system (diagnostic, interface, image
processing, etc.).
ADF
Sensor / Motor
Scanner
CCD Board / Motor /
Sensor / Lamp
Control Panel
Switch / Display / LED
• Fax Board
The Fax Board controls the Fax interface.
• Scanner Board
The Scanner board controls the IIT interface.
• Control Panel
Allows the user to view the printer status or execute operations with the LCD,
LED, and buttons.
• USB Front Board
The USB Front Board is used to connect USB memory devices for scanning to
USB memory and printing from USB memory. This connector complies with
USB2.0 (Hi-Speed).
Xerox Internal Use Only
Drive Signal
Sensor Signal
Drive Signal /
CCD Clock
Sensor Signal
Image Signal
Message Signal /
Drive Signal
Switch Signal
Command
Status
Theory of Operation
IP Board
Telephone
FAX Board
Line
R G B
Y M C K
Image Signal
MCU
s6015-039
2-49