Xerox Phaser 6000 Service Manual page 149

Phaser 6000/6010 and WC 6015 MFP
Error Message Summary (Continued)
Error
Code Error Message LCD
033-787 Memory Full
033-787 Fax
Job Failure
Press OK
033-788 Memory Full
033-788 Fax
Job Failure
Press OK
034-700 Busy
034-700 Fax
Job Failure
Press OK
034-701 No Dial Tone
034-701 Fax
Job Failure
Press OK
034-702 Communication Fail
to 034-7xx Fax
034-711 Job Failure
Press OK
034-750 Communication Fail
to 034-7xx Fax
034-768 Job Failure
Press OK
041-340 041-340
Code:xxxxxxxx
Restart Printer
042-325 Motor Error
Restart Printer
042-358 042-358 Printer
Restart Printer
Contact Support
If Message Returns
042-372 Deve Mode Error
Restart Printer
061-370 061-370 Printer
Code:xxxxxxxx
Restart Printer
062-321 062-321 System
Restart Printer
062-322 <No message, only
appears in error log>
062-360 062-360 System
Restart Printer
Xerox Internal Use Only
Error Messages and Codes
Error Description
<Calling Table Full>
The Calling Table is full.
<Memory Full>
Exceeds the memory capacity.
<FAX Busy>
FAX called number is busy.
<No Dial Tone>
No dial tone on the phone line.
Communication Errors
RX Communication Errors
<NVRAM Error>
The operation error of NVM
(read/write check error etc.) is
detected.
Motor Error
<Fan Motor Failure>
MCU detects an error upon
receiving error signal from the
Fan Motor.
<Deve Mode Change Failure>
Deve Mode Change failure is
detected.
<LPH Failure>
LPH failure is detected.
<Carriage Motor Error>
Carriage Motor error is detected.
Scanner drive calibration failed.
<Image Processing Error>
Image Processor error is detected.
Go to
3-66
3-64
3-67
3-67
3-68
3-69
3-70
3-71
3-72
3-73
3-75
3-76
3-77
3-110
3-13