Horizontal Band, Voids, Or Streaks - Xerox Phaser 6000 Service Manual

Image Quality

Horizontal Band, Voids, or Streaks

Initial Actions
5-24
There are areas of the image that are extremely light or are missing entirely. These
missing areas form wide bands which cover a wide area horizontally, perpendicular
to the paper feed direction.
• Clean the LED windows. See "Cleaning the LED Windows" on page 7-3.
• Check the paper transfer path.
• Ensure there is no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts
Toner Cartridge Y, PL5.1.13
Toner Cartridge M, PL5.1.14
Toner Cartridge C, PL5.1.15
Toner Cartridge K, PL5.1.16
Transfer Roller, PL6.1.7
Fuser, PL5.1.1
Troubleshooting Procedure Table
Step Actions and Questions
1
Check the paper condition.
Is the paper dry and approved for
use?
2 Compare the defects to the Pitch
Chart (page 5-44).
Do any of the horizontal bands
match the chart?
Xerox Internal Use Only
Example Print
Horizontal Band, Void, or Streaks
Yes No
Go to step 4. Replace with
dry, approved
paper, then go
to step 3.
Replace the Contact your
corresponding designated
parts. field support for
assistance.
Phaser 6000/6010 and WC 6015 MFP