Workcentre 6015 Mfp Fax/Scanner Diagnostic Test Descriptions - Xerox Phaser 6000 Service Manual

Color laser printer/multi-funtion printer
Hide thumbs Also See for Phaser 6000:
Table of Contents

Advertisement

WorkCentre 6015 MFP Fax/Scanner Diagnostic Test Descriptions

Phaser 6000/6010 and WC 6015 MFP
Control Panel
(WorkCentre 6015N/NI
Test
Color MFP)
Information
Tests FAX and Scanner components.
Scan Counter
FB: 0x00000000
ADF: 0x00000000
Scanner Maintenance
White Balance
White Balance
Registration Param.
Parameter
Range
Regi ADF Lead
-2.0 mm to 2.0 mm,
in 0.1 mm steps
Regi ADF Side
-1.0 mm to 1.0 mm,
in 0.1 mm steps
Regi FB Lead
-2.0 mm to 2.0 mm,
in 0.1 mm step
Regi FB Side
-1.0 mm to 1.0 mm,
in 0.1 mm steps
Auto Registration
IIT I/O Check
Scan Counter Clear
Parameter
Pulse Dialing
Enable Pulse Dialing
NOTE You can not select Pulse
Pulse dial make/break
ratio
Enable 20 PPS DP
NOTE You can not select Pulse
DTMF Tone
DTMF high tone
level (-dB)
DTMF high/low level
difference (dB)
DTMF Dialing
Speed (ms)
Xerox Internal Use Only
Description
Displays the scan counter value.
Reports the result of white balance
which is performed while the printer
powers up.
This function adjusts the registration
parameters of the scanner.
Description
Adjusts Registration of the ADF leading
edge.
Adjusts Registration of the ADF side
edge.
Adjusts Registration of the flatbed
leading edge.
Adjusts Registration of the flatbed side
edge.
Reports the result of auto registration
which is performed while the printer
powers up.
FB Home Sensor
Tests the scanner sensors.
ADF Scan Sensor
ADF Document Sensor
ADF Cover Sensor
This function clears the flat bed and
ADF counters.
Value Options
Disable, Enable
dialing at the Fax
Setting Menu, only Tone
dial.
0: 30% / 70%, 1: 32% / 68%,
2: 33% / 67%, 3: 36% / 64%,
4: 38% / 62%, 5: 39% / 61%,
6: 40% / 60%, 7: 42%/ 58%
Disable, Enable
20PPS dialing at the Fax
Setting Menu.
0: -3 dB, 1: -4 dB, 2: -5 dB, 3: -6 dB,
4: -7 dB, 5: -8 dB, 6: -9 dB, 7: -10 dB
0: 0 dB, 1: -1 dB, 2: -2 dB, 3: -3 dB,
4:- 4 dB, 5: -5 dB
0: 70 ms, 1: 80 ms, 2: 85 ms,
3: 90 ms, 4: 95 ms, 5: 100 ms,
6: 105 ms, 7: 110 ms
Troubleshooting
FB: Platen scans
ADF: ADF scans
4-57

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workcentre 6015 mfpPhaser 6010

Table of Contents