Motor Error - Xerox Phaser 6000 Service Manual

Motor Error

Phaser 6000/6010 and WC 6015 MFP
The Main Drive Assembly has failed.
Applicable Error
• 042-325: Motor Error
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts
Main Drive Assembly, PL6.1.2
Main Motor Harness, PL6.1.7
MCU Board, PL7.2.2
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the connections between the
MCU Board P/J16 and the Main
Drive Assembly P/J160.
Are the connections secure?
2
Does the error persist?
3 Is the Main Drive Assembly installed
correctly?
4 Does the error persist when the
power is turned off and on?
Xerox Internal Use Only
Error Messages and Codes
Wiring and Plug/Jack Map References
"Map 3 - Phaser 6000/6010" on
page 10-9
"Phaser 6000/6010 LVPS" on
page 10-11
"Phaser 6000/6010 Drive" on
page 10-13
"Map 3 - WorkCentre 6015 MFP" on
page 10-23
"WorkCentre 6015 MFP LVPS" on
page 10-25
"WorkCentre 6015 MFP Drive" on
page 10-27
Yes
Go to step 3.
Go to step 3.
Go to step 4.
Go to step 5.
No
Reconnect the
connectors,
then go to
step 2.
Complete.
Reseat the
Main Drive
Assembly, then
go to step 5.
Complete.
3-71