Xerox Phaser 6000 Service Manual page 514

Service Parts Disassembly
8-120
7. Disconnect the ribbon cable from P/J17 on the MCU Board.
8. Disconnect the connectors on the LVPS, and remove 4 screws (silver, M3, 6
mm). Remove the LVPS from the printer.
Warning
When reinstalling the LVPS, ensure all the cables remain properly routed
through the harness guides and all connectors are fully seated.
Xerox Internal Use Only Phaser 6000/6010 and WC 6015 MFP
s6000-072
s6000-071