Usb Memory Removal Error - Xerox Phaser 6000 Service Manual

USB Memory Removal Error

Phaser 6000/6010 and WC 6015 MFP
USB memory is removed while memory reading job is being executed.
Applicable Error
• 016-791: USB Memory Removal Error
• 016-795: File Format Error
• 016-797: File Read Error
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts
IP Board, PL7.1.9/PL7.1.16
MCU Board, PL7.2.2
Troubleshooting Procedure Table
Step Actions and Questions
1
Reseat all connections on the IP
Board and MCU Board.
Does the error persist?
2
Replace the IP Board (page 8-114).
Does the error persist?
3 Replace the MCU Board
(page 8-121).
Xerox Internal Use Only
Error Messages and Codes
Wiring and Plug/Jack Map References
"Map 2 - WorkCentre 6015 MFP" on
page 10-22
"Map 3 - WorkCentre 6015 MFP" on
page 10-23
"WorkCentre 6015 MFP Image
Processor Board" on page 10-32
Yes
Go to step 2.
Go to step 3.
Complete.
No
Complete.
Complete.
3-41