Xerox Phaser 6000 Service Manual page 97

Phaser 6000/6010 and WC 6015 MFP
• Operation in B/W mode
In B/W mode, the Switching Solenoid in the Developer Drive Assembly
disconnects the magnet rollers for YMC from the torque from the Drive
Assembly. This allows only the K magnet roller to rotate to form a visible toner
image in Black.
[ Black And White Mode ]
Magnet Roller (K)
Flange D4
Actuator K
(Black And White
Mode Position)
Switching Sensor
Xerox Internal Use Only
Theory of Operation
Flange D4
Gear Cam
Gear C
Switching Solenoid
Cutting Off Drive
Flange D4
Gear D4 In
Gear D4 Out
Drive From Main Motor
Gear C
s6000-108
2-41