Workcentre 6015 Mfp Print Engine Test Procedures - Xerox Phaser 6000 Service Manual

WorkCentre 6015 MFP Print Engine Test Procedures

Phaser 6000/6010 and WC 6015 MFP
Test
DEVE Roundtime K
DEVE Roundtime
YMC
XERO Roundtime
M/C DispTime Y
M/C DispTime M
M/C DispTime C
M/C DispTime K
M/C Pixel Y
M/C Pixel M
M/C Pixel C
LM/C Pixel K
M/C ColorEmptyBW
M/C Custom Start
M/C Custom End
Waste Toner Y
Waste Toner M
Waste Toner C
Waste Toner K
Toner PV Y
Toner PV M
Toner PV C
Toner PV K
Toner DispTime Y
Toner DispTime M
Toner DispTime C
Toner DispTime K
Toner TDCC Y
Toner TDCC M
Toner TDCC C
Toner TDCC K
Toner Pixel Y
Toner Pixel M
Toner Pixel C
Toner Pixel K
Print
Entering Print Engine Diagnostics
1. Turn the printer Off.
2. Press and hold the Up and Down Arrow simultaneously and turn the printer
On.
3. Release the buttons when CE Mode Please wait appears on the display.
4. Press OK at Printer.
5. Press OK at ESS Diag.
Xerox Internal Use Only
Control Panel
(WorkCentre 6015 MFP)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Std.: 700/High:14000
Std.: 700/High:14000
Std.: 700/High:14000
Std.: 700/High:14000
-
-
-
-
-
-
-
-
-
-
-
-
Selecting this menu item prints the parameter values and life counter
values stored in the IOT.
Troubleshooting
Test Description
4-39