Xerox Phaser 6000 Service Manual page 144

Error Messages and Codes
3-8
Error Message Summary (Continued)
Error
Code Error Message LCD
016-766 SMTP Error
016-766 Scan
Job Failure
Press OK
016-767 Address Error
016-767 Scan
Job Failure
Press OK
016-791 USB Memory was
removed.
016-791 System
Job Failure
Press OK
016-795 File Format Error
016-795 Printer
Job Failure
Press OK
016-797 File Read Error
016-797 Printer
Job Failure
Press OK
016-799 Invalid Job
Press OK Button
016-920 Wireless Error
016-920 System
Setup Fail
Press OK
016-930 USB Host Error
016-931 016-930 System
Unsupported Device
Remove from USB Port
016-981 Collate Full
016-981 Printer
Job too Large
Press OK
016-985 Mail Size Limits
016-985 Scan
Job Failure
Press OK
017-970 Memory Full
017-970 Scan
Job Failure
Press OK
017-980 Report error
017-980 System
Job Failure
Press OK
Xerox Internal Use Only
Error Description
<SMTP>
Can not transfer completely.
<E-mail Address Error>
Recipient address is invalid.
<USB Memory Removal Error>
USB memory is removed while
memory reading job is being
executed.
<File Format Error>
An unsupported file was selected at
USB Memory Print.
<File Read Error>
The contents of the USB memory
cannot be read correctly.
<Job Environment Violation>
Detects violation data for the print
condition. The print data specifies
paper type/size not available for
the printer.
<Wireless Setting Error Time-out
Error>
The time-out was done to the
connection with Register.
<USB Host Error>
Detect installation of un-supported
device.
<Collate Full>
Exceeds the memory capacity.
<Mail Size Error>
Mail Size Limits Error
<Out of Memory>
Out of Memory.
<Report File Open/Close Error>
Report job fails to open/close
report file.
Phaser 6000/6010 and WC 6015 MFP
Go to
3-40
3-40
3-41
3-41
3-41
3-42
3-43
3-44
3-44
3-45
3-45
3-46