Memory Full Fax Job Failure - Xerox Phaser 6000 Service Manual

Error Messages and Codes

Memory Full Fax Job Failure

Applicable Error
Initial Actions
3-66
The Calling Table is full.
• 033-787: Memory Full
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts
IP Board, PL7.1.9
MCU Board, PL7.2.2
Troubleshooting Procedure Table
Step Actions and Questions
1
Reseat the connectors on the IP and
MCU Boards then cycle system
power.
Does the error persist?
2 Replace the IP Board (page 8-114).
Does the error persist?
Xerox Internal Use Only
Wiring and Plug/Jack Map References
"Map 2 - WorkCentre 6015 MFP" on
page 10-22
"WorkCentre 6015 MFP Image
Processor Board" on page 10-32
Yes No
Go to step 2. Complete.
Replace the Complete.
MCU Board
(page 8-121).
Phaser 6000/6010 and WC 6015 MFP