Pitched Color Dots - Xerox Phaser 6000 Service Manual

Image Quality

Pitched Color Dots

Initial Actions
5-20
There are recurring color dots on the page.
• Check the paper transfer path.
• Ensure there is no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts
Transfer Roller, PL1.1.9
Fuser, PL5.1.1
Troubleshooting Procedure Table
Step Actions and Questions
1 Measure the pitch.
Does the pitch match any of the
pitches shown in the Repeating
Defects Table? See page 5-3.
Xerox Internal Use Only
Example Print
Repeating Defect, Developer Roller
Yes No
Replace the Contact your
corresponding designated
parts. field support for
assistance.
Phaser 6000/6010 and WC 6015 MFP