Transfer/Fusing/Exit - Xerox Phaser 6000 Service Manual

Theory of Operation

Transfer/Fusing/Exit

2-24
When the sheet passes the registration section it then passes through the toner
transfer position. There it is nipped between the transfer belt and the Transfer
Roller that are driven by the Main Drive Assembly. The toner image on the transfer
belt is transferred onto the sheet. As the sheet is forwarded to the exit section, the
toner image is fused onto the sheet surface by the heat roller that is driven by the
Main Drive Assembly.
At the exit section, the sheet is ejected by the Fuser's exit roller. The exit roller is
driven by the Main Drive Assembly.
Exit Roller
Pressure Belt
Transfer Roller
Xerox Internal Use Only
Heat Roller
Phaser 6000/6010 and WC 6015 MFP
Transfer Belt
s6000-086