Streaks - Xerox Phaser 6000 Service Manual

Streaks

Phaser 6000/6010 and WC 6015 MFP
Streaks appear on the output.
Initial Actions
• Check the paper transfer path.
• Ensure there is no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts
Transfer Roller, PL1.1.9
Fuser, PL5.1.1
Troubleshooting Procedure Table
Step Actions and Questions
1 Clean the LED windows and the
inside of the printer. See "Cleaning"
on page 7-3 and "Maintenance" on
page 7-8.
Does the image print correctly?
2 Check the paper being used.
Is it approved paper?
3 Does the image print correctly?
4
Reseat and lock the Toner
Cartridges.
Does the image print correctly?
5 Replace the Transfer Roller
(page 8-14).
Does the image print correctly?
6 Replace the Fuser (page 8-80).
Warning:
Xerox Internal Use Only
Example Print
Allow the Fuser to cool
before replacing.
Image Quality
Vertical Stripes
Yes No
Complete. Go to step 2.
Go to step 4. Load supported
media, then go
to step 3.
Complete. Go to step 4.
Complete. Go to step 5.
Complete. Go to step 6.
Complete.
5-19