Xerox Phaser 6000 Service Manual page 567

Phaser 6000/6010 and WC 6015 MFP
Symbol
DEVE_A
Connection Wire
CLUTCH ON(L)+24V
Function Logic 1
EXIT SENSED(L)+3.3VDC
Function Logic 2
Connection of Wires
Solenoid/Clutch
M
Motor
Optic Sensor
LED
Safety Interlock Switch
Xerox Internal Use Only
Description
Denotes a connection between parts with
harness or wires, attached with signal
name/contents.
Denotes function, and logic value of the signal
to operate the function (Low: L, High: H). The
given voltage is for signal in high status. The
arrow indicates the direction of signal.
Denotes function, and logic value of the signal
when the function operated (Low: L, High: H).
The given voltage is for signal in high status.
The arrow indicates the direction of signal.
Denotes a connection between wires.
Denotes a Clutch or Solenoid.
Denotes a Motor.
Denotes a Photo Sensor.
Denotes an LED.
Denotes a Safety Interlock Switch.
Wiring
10-3