Fax Checksum Error - Xerox Phaser 6000 Service Manual

Fax Checksum Error

Phaser 6000/6010 and WC 6015 MFP
Troubleshooting Procedure Table
Step Actions and Questions
1
Reseat all connectors on the IP
Board and the MCU Board.
Does the error persist?
2 Replace the LED Driver Board.
Does the error persist?
3 Replace the IP Board (page 8-114).
Does the error persist?
Checksum error for Fax parameter is detected.
Applicable Error
• 016-323: Fax Checksum Error
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts
IP Board, PL7.1.9
MCU Board, PL7.2.2
Troubleshooting Procedure Table
Step Actions and Questions
1 Reseat all connectors on the IP
Board and the MCU Board.
Does the error persist?
2 Replace the IP Board (page 8-114).
Does the error persist when the
power is turned on?
Xerox Internal Use Only
Error Messages and Codes
Yes
Go to step 2.
Go to step 3.
Replace the
MCU Board
(page 8-121).
Wiring and Plug/Jack Map References
"Map 2 - WorkCentre 6015 MFP" on
page 10-22
"Map 3 - WorkCentre 6015 MFP" on
page 10-23
Yes
Go to step 2.
Replace the
MCU Board
(page 8-121).
No
Complete.
Complete.
Complete.
No
Complete.
Complete.
3-29