352X-1010-Xxx / Local Xxx (Equal Access Dialing); 3521-Table Options; 3521-01: Initialize Table; 3521-02: Table Type (Allow Or Deny) - NEC DSX Software Manual

35xx-Toll Restriction

352x-1010-XXX / Local XXX (Equal Access Dialing)

3521-Table Options

3521-Table Options 352x-1010-XXX / Local XXX (Equal Access Dialing)
Description
Use this program to set up the 1010 + XXX Equal Access Dialing Table. By default, this type of dialing is
enabled because the 1010 + XXX Equal Access Dialing Table is a deny table with no entries (i.e., it denies
nothing). A table entry is 3 digits long, using the digits 0-9. You can use the * character as a wild card,
which can be entered in any position in the table. A wild card allows the table to accept any digit in that
position. For example, the entry 2*0 represents 200 through 290. The Verified Account Code Table can
hold up to 96 entries.
Options

3521-01: Initialize Table

(Initialize Table)
Use this option to initialize the 1010 + XXX Equal Access Dialing Table.
Features
• Toll Restriction (page 351)
IntraMail Features
• None
Options
• No (0) - Initialize the 1010 + XXX Equal Access Dialing Table.
• Yes (1) - Do not initialize the 1010 + XXX Equal Access Dialing Table.
Default
• N/A

3521-02: Table Type (Allow or Deny)

(Allow/Deny)
Use this option to designate the table as an allow or deny table. If set as an allow table, Toll Restriction will
allow (permit) only those codes programed into the table.If set as a deny table, Toll Restriction will deny
(block) only those codes listed in the table.
Features
• Toll Restriction (page 351)
IntraMail Features
• None
Options
• 0
• 1 for allow
Default
• 0
844 ◆ Line Options: 3101-3714
for deny
DSX Software Manual