Programming Password Setup - NEC SL 1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Use Program 90-02 : Programming Password Setup to set the system passwords. For password
Program
entry, the system allows eight users to be defined. Each user can have a:
• Unique alphanumeric name (up to 10 alphanumeric characters)
90
• Password entry of up to eight digits (using 0 ~ 9, # and
• Password level
The IN level password is used by the System Installer for system programming. The SA or SB level
password cannot access the IN level programs. The reverse type (white on black) just beneath the De-
scription heading is the program access level. You can only use the program if your access level meets
or exceeds the level the program requires. (SA level password can access to SA or SB programs, and
SB level password can access to SB programs only.)
Input Data
Item No.
Default
User No.
1
2
3
4
5
Conditions
• More than one extension can be in the programming mode.
2-502
Downloaded from www.Manualslib.com
Program 90 : Maintenance Program
It is NOT recommended to change these data. If you must change these Data
make sure you keep the ID/Password or you will never be able to enter the pro-
gram unless you clear all the System Data/Setting.
User Number
Item
01 User Name
02 Password
03 User Level
User Name
nec-i
tech
admin1
admin2
user1
manuals search engine

90-02 : Programming Password Setup

)
*
Maximum 10 characters
Up to eight digits
0 = Prohibited User
2 = IN (Installer Level)
3 = SA (System Administrator Level 1)
4 = SB (System Administrator Level 2)
5 = UA (User Programming Administer Mode Level 1)
Password Level
1 (MF)
******
12345678 2 (IN)
0000 3 (SA)
9999 4 (SB)
1111 5 (UA)
Program 90 : Maintenance Program
ISSUE 1.0
1 ~ 8
Input Data
Level Description
Manufacture Level - Access to all system
program
Installer Level - Access to all IN level
programs.
System Administrator Level 1 - Re-
stricted Access
System Administrator Level 2 - More Re-
stricted Access
User Programming Administer Mode
Level 1