Pc Programming; Figure 1-31 Pc Programming Overview; Figure 1-32 Pcpro Connection Dialog - NEC SL1100 Features And Specifications Manual

SL1100
Description
The SL1100 has three different methods for programming. The first is via the Telephone, the second
is by PCPro and third by WebPro.
PCPro is a Microsoft Windows based application. It allows the technician/system administrator to
download a database from the system, make changes, and then upload.
The WebPro application is a browser base. It allows the technician/end user to make a change to the
P
system/terminal. No special installation program is required.
An overview of the three programming applications is shown below.
(Modem)
Connecting
As can be seen in
available to PCPro/WebPro.
PCPro, user can connect directly or remotely using a modem/LAN. A connection with the system is
made via the Connection Dialog in the application. (Refer to
page 1-577.)
• Modem (remote) connections are established via the internal VMDB modem. To access the modem,
dial a trunk that is directed to the modem access service code (DIL or DID) or dial an extension that
is redirected to the modem access service code. When connecting with a Modem, a Dial Up
Connection (PPP) must be set up in Windows Network Connections.
When uploading via a Dial Up connection, uploading card configuration (Hardware Upload) is not
supported.
• IP (LAN) connections are established by connecting the LAN cable to CPU Unit.
1-576
PCPro
K S U

Figure 1-31 PC Programming Overview

Figure 1-31 PC Programming Overview on page

PC Programming

Telephone
WebPro PCPro
(IP) (IP)
1-576, three connection types are
Figure 1-32 PCPro Connection Dialog on
PC Programming
ISSUE 2.0