Section 8: Specifications
8.3.2 RS232-PIB3G
Interface
Connector
Bit Rate
Data Format
Communication Protocol
8.3.3 RS232-ICP
Interface
Connector
Bit Rate
Flow Control
Data Format
8.3.4 GPIO Port
Interface
Connector
Number of I/O Lines
Type of Connection
Input Current
Output Current
Input Forward Voltage Drop
8.3.5 Simple Contact Closure Interface (SCCI) Port
Interface
Connector
Number and type of I/O
Input Current
Input forward voltage drop
8-4
TIA-232
9-pin subminiature D, female
115,200 bps
1 start bit, 8 data bits, 1 stop bit, no parity
Christie Serial Protocol
TIA-232
9-pin subminiature D, female
38,400 (default); 57,600; 115,200 bps not auto-detected
Hardware (RTS/CTS)
1 start bit, 8 data bits, 1 stop bit, parity odd
Opto-LED inputs, transistor outputs
37-pin subminiature D, female
16 - 8 inputs, 8 outputs including 1 health signal output
Opto-isolated
5mA nominal, 50mA maximum
50mA maximum
1.1V nominal, 1.4V maximum (@5mA)
Opto-LED inputs, TTL voltage outputs
9-pin subminiature D, female
Input 1 - Lamp Off
Input 2 - Lamp On
Input 3 - Douser Open
Input 4 - Douser Closed
Output 1 - Projector Health (high = health ok)
5mA nominal, 50mA maximum
1.1V nominal, 1.4V maximum (@5mA)
D4K35 Service Manual
020-100817-01 Rev. 1 (04-2012)