Control Signal Compatibility; Ethernet Port; Rs232-Pib; Rs232-Icp - Christie CP2230 User Manual

A.3 Control Signal Compatibility
A.3.1 Ethernet Port
Interface
Connector
Bit Rate
A.3.2 RS232-PIB
Interface
Connector
Bit Rate
Flow Control
Data Format
Communication Protocol
A.3.3 RS232-ICP
Interface
Connector
Bit Rate
Flow Control
Data Format
A.3.4 GPIO Port
Interface
Connector
Number of I/O Lines
Type of Connection
Input Current
Output Current
Input Forward Voltage Drop
A.3.5 Simple Contact Closure Interface (SCCI) Port
Interface
Connector
Number and type of I/O
CP2230 User Manual
020-100430-07 Rev. 1 (05-2014)
10Base-T/100-Base-TX
Female RJ-45
10 Mbps or 100 Mbps half and full duplex
TIA-232
9-pin subminiature D, female
115,200 bps
Hardware (RTS/CTS)
1 start bit, 8 data bits, 1 stop bit, no parity
Christie Serial Protocol
TIA-232
9-pin subminiature D, female
38,400 (default), 57,600, 115,200 bps, not auto-detected
Hardware (RTS/CTS)
1 start bit, 8 data bits, 1 stop bit, parity odd
Opto-LED inputs, TTL voltage output
37-pin subminiature D, female
16 - 8 inputs, 8 outputs including 1 health signal output
Opto-isolated
5mA nominal, 50mA maximum
50mA maximum
1.1V nom., 1.4V max. (@5mA)
Opto-LED inputs, TTL voltage outputs
9-pin subminiature D, female
Input 1 - Lamp Off
Input 2 - Lamp On
Input 3 - Douser Open
Input 4 - Douser Closed
Appendix A: Specifications
A-5