A Quick Guide To The Commands - 3Com SuperStack II Manual

A Quick Guide to
the Commands
Table 8 describes the commands that are available in the command line
interface.
Table 8 Command line interface commands
Command
logout
bridge agingTime
bridge display
bridge
multicastFiltering igmp
bridge
multicastFiltering
routerPort addPort
bridge
multicastFiltering
routerPort autoDiscovery
bridge
multicastFiltering
routerPort list
bridge
multicastFiltering
routerPort removePort
bridge port address add
bridge port address find Finds a MAC address within the address
bridge port address list Displays a list of MAC addresses associated with
bridge port address
remove
bridge port detail
bridge port stpCost
bridge port stpFastStart Enables and disables spanning tree Fast Start on
bridge port summary

A Quick Guide to the Commands

What does it do?
Exits the current user from the command line
interface.
Specifies the aging time of the bridge address
on the current Switch unit.
Displays the bridge information on the current
Switch unit.
Enables and disables IGMP multicast snooping
for all units in the stack.
Adds a statically configured router port on any
unit in the stack.
Enables and disables auto-discovery of router
ports for all units in the stack.
Lists all router ports for all units in the stack in
ascending unit/port number order, whether
manually configured, or learned automatically.
Removes a router port from any unit in the
stack, whether manually configured, or learned
automatically.
Adds a statically configured MAC address.
databases on all units in the stack.
the selected port.
Removes an individual MAC address.
Displays detailed information about a port on
the current Switch unit.
Sets the spanning tree path cost on a port on
the current Switch unit.
a port on the current Switch unit.
Displays summary information about a single
port, or all ports on the current Switch unit.
101